A ready-to-use, foaming, multi-purpose cleaner formula with the latest acid replacement technology. Removes dirt, soap scum, salts, body oils, rust, lime, calcium and iron deposits.
In bathrooms, spas, shower rooms, swimming pools hot
tubs, hotels, motels, nursing homes, laundries on ceramic
tile, grout, porcelain, concrete, stainless steel, fiberglass
and anywhere water causes oxidation and mineral
Applies as a stable foam using a conventional trigger
sprayer allowing foam that clings to vertical surfaces, low
pH, no irritating fumes, non corrosive to skin.
Active Ingredients: 30%
Solubility in Water: Complete
Flash Point: None
Viscosity: Water Thin
Weight per Gallon: 8.6
Dispose of used/unwanted product according to state and local regulations. Offer container for recycling.
1 Quart Bottle, 1 Gallon Bottle,
5 Gallon Pail, 30 & 55 Gallon Drums.
|Directions for Product Use
1. Test in an inconspicuous area before use.
2. Lightly spray cleaner directly on surface. Apply with
sponge and let stand for 1-3 minutes.
3. Wipe and rinse thoroughly with clear water to avoid
drying on surface.
4. For extreme soil conditions, repeat as necessary.
5. For toilet bowls and urinals, remove excess water from
bowl prior to cleaning. Follow steps 2 & 3 making sure
to apply to the underside of the rim.
Do not mix with bleach or any other
chemical. Do not use on frosted glass, aluminum or
galvanized metal, natural marble or stone surfaces. Do
not let product stay on metal, fabrics or carpet – it may
There are no reviews yet.